Raindrops on Roses





This is a simple little card made from the Raindrops on Roses Paper Collection.  I made the card base from a piece of dark plum cardstock measuring 5 1/4"x8".  Fold in half.  I used pop dots to adhere the paper with the sentiment to the front of the card.

Using the Deluxe Flower Shaping Paper I stamped Classic Roses in StampinUp Blackberry Bliss.  I then colored the stamped images in lightly with StampinUp Berry Burst Ink.  I die cut the Roses using the Classic Rose Die.  I like to lightly mist the roses with water when I put them in the 3D Rose Shaping Mold.  For this card I made one large rose, 4 medium roses and 2 rose buds.  Use the Deluxe Flower Shaping Kit to finish shaping the roses and assemble with hot glue or Designer Dries Clear Adhesive.

Using the same technique I stamped 8 of the Tweet Cherry Blossoms on the Deluxe Flower Shaping Paper.  8 stamped images will give you 4 finished blooms.  I stamped them in LuLu Lavender and lightly colored them.  Cut them out using the Tweet Cherry Blossom Die and shape them with the 3D Cherry Blossom Shaping Mold.  Glue two blossoms together, offsetting the blooms and pierce the center and add a couple of the Pastel Pearls Stamens - Small.  I colored these white stamens with a little of the LuLu Lavender Ink before assembling.

Stamp out some of the Leafy Accents in Fern Green and color with Leaf Green.  Cut them out with the coordinating die and run them through the die cutting machine using the 3D Leafy Accents Shaping Mold.

Assemble your spray of flower on the left side of your card. I tucked a couple of the Rock Candy Stamens in burgundy in a couple spots around the edges of the flower spray.

Products Used:  Raindrops on Roses Paper Collection, HCP-3752 Classic Rose Cling Stamp Set, HCD1-7110 Classic Roses Die, HCD1-461 3D Rose Shaping Mold, HCPC-3835 Leafy Accents Cling Stamp Set, HCD1-7193 Leafy Accents Die, HCFB1-467 3D Leafy Accents Shaping Mold, HCPP1-468 Deluxe Flower Shaping Paper, HCDA2-450 Stack and Store Daubers, HCST1-401 Deluxe Flower Shaping Kit, HCS1-457-1 Pastel Pearls Stamens - Small, DDOTS Double Dots, 159723 Designer Dries Clear Adhesive, 352854 Metal Tip for Adhesive Bottles, HCPC-3866 Tweet Cherry Blossoms Stamp Set, HCFB1-474 3D Cherry Blossom Shaping Mold, HCD1-7230 Tweet Cherry Blossom Die, HCS1-459-4 Rock Candy Stamens - Small, StampinUp Blackberry Bliss and Berry Burst Ink. Ranger Archival Ink Lulu Lavender, Hot Glue Gun and Glue, Scissors, Water Mister, Paper Trimmer, ScorPal Scoring Board, Die Cutting Machine

Comments

  1. Robin ClendenningJanuary 28, 2020 at 9:30 PM

    Your card is gorgeous!!! I always loved that die! Your flowers are beautiful!

    ReplyDelete
    Replies
    1. Cynthia ThoenenJanuary 29, 2020 at 6:21 AM

      Thank you Robin for everything! You have been a great help to me and a constant inspiration!

      Delete

Post a Comment

Popular posts from this blog

Creating Classic Roses

Image
I have been asked to demonstrate how I make my Classic Roses.   They are really pretty simple.  I start with the Classic Rose Die from Heartfelt Creations, the Deluxe Flower Shaping Paper, the Golf Tools and some Ink. You can get all of these items on the Heartfelt Creations web page.  I like to use hot glue but I have made many of them with the Designer Dries Clear Glue too! I prefer this Deluxe Flower Shaping Paper because it is very heavy and stands up to all the shaping it takes without falling apart.  It also keeps a nice sturdy flower shape indefinitely.   I die cut out four of the same size petal shapes.  (The one pictured here is the next to the largest size.)  I use ink to "shuck" the edges with a sponge dauber and color the inside with a soft makeup brush.   I use the Golf Tool Shaping set from HC exclusively for shaping these roses.  I poke a hole in the center of each of the four flower petal groups, with the Golf Tool. At this point you can use a small stamen but
Read more

Butterfly Kisses and Wonderful Wishes Baby Card

Image
So many of you asked for some instructions to make this sweet little z-fold baby girl card I will be happy to help.  Please let me know if you have any questions.  This card is super simple and so fun to make and has so many variations. You start with your base which measures 11 inches wide by 4 1/4".  Score at 2 3/4" and again at 5 1/2"  Cut a strip 1 1/2" wide by 11" and score at the same measurements.  I didn't take a picture of attaching that top piece but you can see from the completed photo how it will attach to your base.  I would mat my base card and my strip before attaching the top z-fold piece.  After that you are ready to assemble your little crib.  You will need two of the pieces from the Album Tags and Accents and if you want a little sentiment on the back like I have in the picture then you will need a third one. On the end piece of the side rails  attach a piece of Scor-Pal tape to the front of each end of both rails.  Fol
Read more

Moonlight Roses

Image
Here is a card I made for a special birthday.  It was really very simple using the Heartfelt Creations Rounded Lattice Window Die and Classic Roses. This was actually my first card for 2020 and one of my first attempts using foam for the roses.  I hope that you will find this card inspiring. Begin by using the 6"x6"Shutter Fold Card in White.  You will need to cut two 6" circles in the paper of your choice using the outer circle die from the Rounded Sunlight Window Die Set.  I used this beautiful blue plaid paper from the Buttons and Blooms Paper Collection. I then cut the two circles in half, giving you four half circle pieces to cover the two front half circles on the card. Find a pattern of the coordinating paper that you like and cut a 6x6" square for the back opening of the card. Next you will need to cut out four of the Rounded Lattice Window Die from the Lux Gold Cardstock.  Using Designer Dries Clear Adhesive glue the gold die cuts over the bl
Read more