Classic Roses for Mother's Day





My mother has always loved roses especially pink ones!  I made this card to celebrate her on this Mother's Day.

The base of the card is white card stock cut at 5" x 6 1/2". On this you will affix a piece of pink card stock cut at 4 3/4" x 6 1/4".  You can use pop dots or clear adhesive. I use pop dots for added dimension.

Cut a piece of green card stock at 7 3/4" x 6 inches. (The photo below is actually shown in white) Score on the long side at 4 1/2".  Fold on the score line and crease with bone folder.  To make the flap of the card/envelope I marked at 3" on the flap and drew a line lightly in pencil to 1/8" below the score line. Do this on both sides to give you the point.




Using the V shaped piece in the Ornate Pocket Accents cut out one in the same green card stock color you have used. Snip it in half at the V giving you two trim pieces you will apply to the edge of your card/envelope flap. Don't worry about the little gap at the point.  This will be covered by your spray of roses.

                                    

Now from a piece of white card stock 6" x 4" cut the 5 3/4" x 3 1/2" ornate die cut.  Take this die cut and place the 3" x 3" fan shaped die from the Frame a Card Leafy Borders Die Set, lining up the edges carefully. Cut this out with your machine.  You should have a piece that looks like this.



Glue your ornate die cut to the green card stock centering and lining up the point with the point on the card flap.


Now you are ready to assemble your roses. I cut them out of the Deluxe Flower Shaping Paper using the Classic Rose Die. I then applied some Blushing Bride ink to the centers and a tiny amount to the cut edges of the rose petals using the sponge daubers. I then used the 3D Classic Rose Mold and spritzed the roses with water and put them through the die cutting machine.  Shape your roses and glue together. You can put Ultrafine glitter on the edges if you would like.

Make your leaves using the Leafy Accents Die and Stamp and Mold.  I stamped these leaves on foam paper using Fern Green. Cut them out and ink the edges with Leaf Green. Use the 3D Leafy Accents Mold and run this through your die cutting machine.

Cut out two sprigs of the Wild Aster spray in white.  You can use Wink of Stella on them to make shinier if you would like.

To assemble the beautiful spray of roses I start with a transparent bow in pink and glue that on to the card.  Below that I glued a small pearl "bow".  Then I glued on the baby's breath sprigs from the Wild Aster Spray Die Set, one on the upper left and one on the lower right corner.  Add your leaves and then your roses.

I made some little embellishments from the medium pearl stamens that I dipped in glue and then in micro beads in silver.  These would be pretty in any color of glitter or micro pearls too!  I made several different ones and liked how the silver brightened up the spray and added some more dimension!!!

Stamp or cut out your Mother's Day sentiment from the Thank You Sentiment Stamp Set and die cut using the Ornamental Tags Die.  I edged the tag with a tiny bit of Dries Clear glue and sprinkled on some Ultrafine Glitter. I glued a small gold ribbon to the tag and attached to the spray.

Here are some helpful links for creating beautiful roses and leafy accents:
 https://www.heartfeltcreations.us/video/how-to-create-dimensional-roses#s=cl
https://www.heartfeltcreations.us/video/quick-and-easy-leafy-accents-using-the-shaping-mold#s=leafy%20accents

Products:
HCD1-7110 Classic Rose Die
HCPC-3835 Leafy Accents Cling Stamp Set
HCD1-7193 Leafy Accents Die
HCFB1-467 3D Leafy Accents Shaping Mold
HCPC-3846 Thank You Sentiments Stamp Set
HCD1-7203 Ornamental Tags Die
HCD1-7230 Tweet Cherry Blossoms Die
HCFB1-474 3D Cherry Blossoms Shaping Mold
HCD1-7258 Wild Aster Spray
HCD1-7214 Ornate Pocket Accents Die
HCD2-7190 Frame a Card Leafy Borders Die
HCPP1-468 Deluxe Flower Shaping Paper
HCDA2-450 Stack & Store Daubers
HCST1-401 Deluxe Flower Shaping Kit
DDOTS Double Dots
159723 Designer Dries Clear Adhesive
352854 Metal Tip for Adhesive
RACP Ranger Archival Ink Pad Fern Green
RACP Ranger Archival Ink Pad Leaf Green
Stampin Up Blushing Bride Ink Pad
Stampin Up Early Espresso Ink Pad
HCS1-457-3 Pastel Bead Stamens - Medium
HCFS1-465 Art Foam Paper
359848 Spellbinders Tool n One
D110305 Rubber Mat Stamp Pad
101 Baby's Breath Ultrafine Transparent Glitter
Scissors
Glue Gun/Hot Glue Sticks
Paper Trimmer
Die Cutting Machine
Micro pearls or beads
Transparent Ribbon for bow
Pearl strand 6 inch
Wink of Stella Clear
White Card Stock base 5" x 6 1/2"
Pink Card Stock 4 3/4" x 6 1/4"
Green Card Stock 7 3/4" x 6"



Comments

Post a Comment

Popular posts from this blog

Creating Classic Roses

Image
I have been asked to demonstrate how I make my Classic Roses.   They are really pretty simple.  I start with the Classic Rose Die from Heartfelt Creations, the Deluxe Flower Shaping Paper, the Golf Tools and some Ink. You can get all of these items on the Heartfelt Creations web page.  I like to use hot glue but I have made many of them with the Designer Dries Clear Glue too! I prefer this Deluxe Flower Shaping Paper because it is very heavy and stands up to all the shaping it takes without falling apart.  It also keeps a nice sturdy flower shape indefinitely.   I die cut out four of the same size petal shapes.  (The one pictured here is the next to the largest size.)  I use ink to "shuck" the edges with a sponge dauber and color the inside with a soft makeup brush.   I use the Golf Tool Shaping set from HC exclusively for shaping these roses.  I poke a hole in the center of each of the four flower petal groups, with the Golf Tool. ...
Read more

Butterfly Kisses and Wonderful Wishes Baby Card

Image
So many of you asked for some instructions to make this sweet little z-fold baby girl card I will be happy to help.  Please let me know if you have any questions.  This card is super simple and so fun to make and has so many variations. You start with your base which measures 11 inches wide by 4 1/4".  Score at 2 3/4" and again at 5 1/2"  Cut a strip 1 1/2" wide by 11" and score at the same measurements.  I didn't take a picture of attaching that top piece but you can see from the completed photo how it will attach to your base.  I would mat my base card and my strip before attaching the top z-fold piece.  After that you are ready to assemble your little crib.  You will need two of the pieces from the Album Tags and Accents and if you want a little sentiment on the back like I have in the picture then you will need a third one. On the end piece of the side rails  attach a piece of Scor-Pal tape to the front of each end of b...
Read more

Moonlight Roses

Image
Here is a card I made for a special birthday.  It was really very simple using the Heartfelt Creations Rounded Lattice Window Die and Classic Roses. This was actually my first card for 2020 and one of my first attempts using foam for the roses.  I hope that you will find this card inspiring. Begin by using the 6"x6"Shutter Fold Card in White.  You will need to cut two 6" circles in the paper of your choice using the outer circle die from the Rounded Sunlight Window Die Set.  I used this beautiful blue plaid paper from the Buttons and Blooms Paper Collection. I then cut the two circles in half, giving you four half circle pieces to cover the two front half circles on the card. Find a pattern of the coordinating paper that you like and cut a 6x6" square for the back opening of the card. Next you will need to cut out four of the Rounded Lattice Window Die from the Lux Gold Cardstock.  Using Designer Dries Clear Adhesive glue the gold die cuts over th...
Read more